Description
DataMODEM RST600 is supplied with specific brackets and cables that allow the terminal to be mounted in a variety of installations
DataMODEM RST600 terminal has an in-built power supply that supports a 4 – 32V DC input and has a cable assembly that provides access to a standard RS232 D9 serial interface for ease of connection.
Terminal Features
- In build 4- 32V DC supply
- At command set
- RS-232 D9 Serail interface
- Countinuous circuit switched data
- Mounting bracket
- Cable assemblies
- 12 month warranty
- 1 x 9522B Iridium Transceiver
- 1 x Mounting Bracket (base plate) with mounting holes & D25 Connection
- 1 x Data & Power Interface cable assembly to support D25 Connection
- 1 x Data & Power Interface cable for use in a compact installation
- 1 x DC Power Cable
- 1 x User manual in hard copy
- 1 x AC Mains / 12VDC Plug Pack
- 1 x Beam Starter CD including AT command set
Power Input Specification & Consumption:
Main Input Voltage Range | +4.0 VDC to +32 VDC | ||
Main Input VVoltage – Ripple | 40mV peak to peak | ||
Consumption at +5VDC | |||
Input Standby current (average) | 250mA | ||
Max current during call | 2.5A | ||
Typical current during call (see note) | 800mA | ||
Power Average – Voice / Data Call (see note) | 4W |
Physical specifications
Without Bracket | |||
Length | 162mm (6.4″) | ||
Width | 81mm (3.2″) | ||
Depth | 28mm (1.1″) | ||
Weight | 420g |
RF Characteristics
Average power during a transmit slot (max) | 7W | ||
Average Power during a frame (typical) | |||
Receiver Sensistivity at 50Ω (typical) | 0.6W | ||
Receiver Spurious Rejection at offsets > 1 MHz (typical) | -118.5dBm60dB |
Frequency Range: 1616 MHz to 1626.5 MHz
Duplexing Method: TDD (Time Domain Duplex)
Oscillator Stability: ± 1.5 ppm
Input/Output Impedance: 50Ω
Multiplexing Method: TDMA / FDMA
Reviews
There are no reviews yet.